Ultrasonic Sieve Cleaner is designed for the safe and effective cleaning of fine-mesh laboratory test sieves. Ultrasonic vibrations remove particles trapped in sieve apertures without aggressive brushing or mechanical force. The system features a 28 litre stainless steel tank, 28–33 kHz cleaning frequency, 1200 W peak ultrasonic power, digital time and temperature control, and a large basket suitable for laboratory sieve cleaning.
- 28 L Tank Capacity: Provides a large cleaning area for laboratory test sieves.
- 28–33 kHz Cleaning Frequency: Ultrasonic waves help release particles trapped in fine sieve openings.
- 1200 W Peak Ultrasonic Power: Provides 600 W effective ultrasonic power.
- 1200 W Heater: Supports heated cleaning for more effective removal of stubborn contamination.
- Digital Timer: Adjustable from 0 to 30 minutes.
- Digital Temperature Control: Adjustable from ambient temperature up to 70 °C.
- Large Cleaning Basket: 460 × 260 × 90 mm.
- Stainless Steel Construction: Main unit and tank components resist water and cleaning solutions.
- Fine-Mesh Sieve Protection: Reduces the need for hard brushing and mechanical cleaning.
- Drainage System: Allows used cleaning liquid to be removed easily.
- Product Code: LT-G0020.
| Product Code | Product Name | Capacity (L) | Cleaning Frequency | Ultrasonic Power | Heater Power | Basket Dimensions (mm) |
| LT-G0020 | Ultrasonic Sieve Cleaner | 28 | 28–33 kHz | 1200 W Peak / 600 W Effective | 1200 W | 460 × 260 × 90 |
LT_KTS_ELEKSALLAMA
Ultrasonic Sieve Cleaner for Laboratory Test Sieves
The Ultrasonic Sieve Cleaner provides a safe and efficient method for cleaning fine-mesh laboratory test sieves. Fine particles can become trapped inside small sieve apertures after repeated particle-size analyses. Conventional brushes may not remove these particles completely and aggressive mechanical cleaning can damage delicate woven wire cloth.
Ultrasonic cleaning reduces this risk by using high-frequency energy inside a liquid-filled cleaning tank.
28–33 kHz Ultrasonic Cleaning
The system operates within a 28–33 kHz frequency range. Ultrasonic energy creates microscopic cavitation activity throughout the cleaning liquid.
This action helps release particles from sieve wires, openings and difficult-to-reach areas. The process does not require strong direct mechanical contact with the mesh. Therefore, it is particularly useful for fine laboratory sieves that require careful maintenance.
28 L Stainless Steel Tank
The cleaner incorporates a 28 litre stainless steel tank. Stainless steel provides resistance to water and commonly used cleaning solutions while also simplifying routine cleaning after operation.
The basket measures 460 × 260 × 90 mm, providing a large working area for compatible laboratory sieves.
Powerful Ultrasonic and Heating System
The unit provides 1200 W peak / 600 W effective ultrasonic power. An integrated 1200 W heater can also increase the cleaning-liquid temperature when required.
Temperature can be controlled digitally from ambient conditions up to 70 °C. Heated cleaning may improve the removal of oily or strongly adhered contamination. However, the selected temperature and cleaning liquid should always be compatible with the sieve material.
Digital Timer and Temperature Control
The operator can set the cleaning duration between 0 and 30 minutes. Digital control allows the same cleaning cycle to be repeated for similar sieve groups.
This helps laboratories establish a more consistent maintenance procedure. A drainage arrangement also simplifies the removal of used cleaning solution after the cycle.
Protecting Fine Test Sieves
Correct sieve maintenance is important because damaged or distorted openings can affect particle-size analysis results. Ultrasonic cleaning helps remove contamination while reducing direct mechanical stress on the sieve cloth.
As a result, the Ultrasonic Sieve Cleaner combines ultrasonic cleaning, controlled heating and stainless steel construction to support fast and gentle maintenance of laboratory test sieves.
