Marshall Compaction Mould
STANDART: EN 12697-10, 12697-30, ASTM D1559, D6926, D5581; AASHTO T245
LT-AS0042 Marshall Compaction Mould
LT-AS0042/1 Marshall Mould Body
LT-AS0042/2 Marshall Base Plate
LT-AS0042/3 Marshall Filling Collar
The Marshall Compaction Mould Set is used to prepare standard cylindrical specimens from bituminous mixtures for Marshall stability and flow testing. Its robust steel construction provides reliable performance during compaction, while the 101.6 mm (4 in.) nominal specimen diameter supports standard Marshall specimen preparation.
- Standard specimen diameter: Designed for nominal 101.6 mm (4 in.) Marshall specimens.
- Complete mould set: Includes the mould body, base plate and filling collar.
- Durable steel construction: Provides high resistance to repeated compaction impacts.
- Corrosion protection: The steel components are protected against corrosion for long-term laboratory use.
- Easy sample filling: The filling collar helps transfer hot bituminous mixture into the mould.
- Stable compaction: The base plate provides firm support during specimen compaction.
- Manual or automatic use: Suitable for use with compatible manual and automatic Marshall compactors.
- Laboratory applications: Suitable for asphalt plants, highway laboratories, universities and quality control facilities.
- Standards support: Designed for Marshall specimen preparation according to EN 12697-30 and ASTM D6926. Liya’s current page also lists EN 12697-10, ASTM D1559, ASTM D5581 and AASHTO T245.
| Product Code | Product Name | Nominal Inside Diameter (mm) | Mould Body Height (mm) | Weight (kg) |
|---|---|---|---|---|
| LT-AS0042 | Marshall Compaction Mould | 101.6 | 87.3 | 3.5 |
What Is a Marshall Compaction Mould?
The Marshall Compaction Mould is used to prepare standard cylindrical specimens from bituminous mixtures. The system supports specimen compaction before Marshall stability and flow testing. Therefore, laboratories can prepare asphalt specimens under controlled and repeatable conditions.
The mould is designed for nominal 101.6 mm (4 in.) diameter specimens. This dimension is widely used for standard Marshall specimen preparation. Its robust steel construction also withstands the impact forces generated during compaction.
Complete Marshall Mould Set
The Marshall Compaction Mould consists of a mould body, base plate and filling collar. Each component performs a specific function during specimen preparation. Liya Test also lists these three components separately under product codes LT-AS0042/1, LT-AS0042/2 and LT-AS0042/3.
The filling collar helps guide the hot bituminous mixture into the mould and reduces material loss during filling. The base plate provides stable support during the compaction process.
101.6 mm Standard Specimen Diameter
The mould supports preparation of nominal 101.6 mm diameter Marshall specimens. Standard 4-inch Marshall compaction moulds have an inside diameter of 101.6 mm and a mould cylinder height of approximately 87.3 mm.
Correct mould geometry is important because specimen dimensions affect density, compaction and subsequent stability and flow measurements. Consistent geometry also allows laboratories to compare different asphalt mixture designs under similar conditions.
Durable Steel Construction
The mould components are manufactured from steel and protected against corrosion. This construction provides resistance to repeated impact and compaction forces during routine asphalt laboratory use. Liya Test also describes the Marshall mould as steel construction with corrosion protection.
The removable components simplify cleaning and routine maintenance. Therefore, laboratory personnel can prepare the mould efficiently for the next specimen.
Manual and Automatic Compaction
The Marshall Compaction Mould can be used with compatible manual or automatic Marshall compactors. This provides flexibility for laboratories with different specimen preparation systems.
The set is suitable for asphalt production plants, highway laboratories, universities, research centres and quality control facilities.
Marshall Specimen Preparation According to Standards
The Marshall Compaction Mould supports specimen preparation procedures according to EN 12697-30 and ASTM D6926. Liya Test additionally lists EN 12697-10, ASTM D1559, ASTM D5581 and AASHTO T245 for the product family.
Overall, the LT-AS0042 Marshall Compaction Mould combines standard specimen dimensions, durable steel construction and a complete three-piece design. Therefore, laboratories can prepare consistent and reliable specimens for Marshall asphalt testing.
