Static Unilogger Data Acquisition Unit
STANDART: –
LT-G0580 Static Unilogger Data Acquisition Unit| 4 Channel
The Static Unilogger Data Acquisition Unit is designed to digitally acquire measurement signals from sensors connected to laboratory testing systems and transfer the data to software for monitoring and evaluation. The LT-G0580 provides 4 independent measurement channels, supports strain gauges and strain-gauge-based sensors, and uses a 24 Bit A/D converter with 1 microstrain resolution for precise measurement applications.
- Product code: LT-G0580
- Product name: Static Unilogger Data Acquisition Unit
- Number of channels: 4 channels
- Digital data acquisition: Converts sensor signals into digital measurement data.
- Sensor compatibility: Supports strain gauges and strain-gauge-based sensors.
- A/D converter: 24 Bit
- Resolution: 1 microstrain
- Multi-channel measurement: Allows several measurement points to be monitored through one unit.
- Software connection: Provides the data interface between sensors and test software.
- Laboratory integration: Suitable for sensor-based laboratory testing systems.
- Measurement monitoring: Supports continuous digital observation of test data.
- Static measurement applications: Designed for controlled laboratory measurements where multiple sensor channels are required.
| Product Code | Product Name | Number of Channels |
| LT-G0580 | Static Unilogger Data Acquisition Unit | 4 |
What Is a Data Acquisition Unit?
The Data Acquisition Unit is an electronic measurement device used to receive signals from sensors connected to laboratory testing systems and convert these signals into digital data.
The LT-G0580 Static Unilogger creates the connection between the measurement sensors and the test software. This allows the operator to monitor values produced during a test through an electronic data system rather than relying only on individual analogue indicators.
The unit provides four measurement channels, making it suitable for applications where several sensor signals must be monitored within the same test arrangement.
4 Channel Measurement System
The LT-G0580 includes 4 independent data acquisition channels.
Each channel can be assigned to a compatible measurement sensor. This configuration allows several measurement points to be monitored through a single data acquisition unit.
Multi-channel acquisition is especially useful in laboratory test systems where load, deformation or other strain-gauge-based measurement signals must be observed simultaneously.
Instead of collecting each measurement separately, the operator can organise multiple sensor signals through one central data-reading system.
Strain Gauge Sensor Compatibility
The LT-G0580 supports strain gauges and strain-gauge-based sensors.
A strain gauge converts very small mechanical deformation into a measurable electrical signal. When a test specimen, structural element or sensor body deforms under load, the strain gauge responds to this dimensional change.
The resulting electrical signal is transmitted to the data acquisition unit. The Static Unilogger then processes the signal and converts it into digital information that can be transferred to the connected software.
This measuring principle is widely used in laboratory systems involving load cells, strain measurement and other deformation-related sensor applications.
24 Bit A/D Converter
One of the main technical features of the LT-G0580 is its 24 Bit analogue-to-digital converter.
Sensors normally produce analogue electrical signals. The A/D converter transforms these signals into digital values that can be processed, displayed and stored by the measurement system.
A high-resolution converter allows smaller variations in the incoming sensor signal to be represented digitally. This capability supports measurement applications where small changes must be monitored throughout the test.
1 Microstrain Resolution
The LT-G0580 provides 1 microstrain resolution.
Microstrain is commonly used to express very small deformation levels measured with strain gauges. The stated resolution allows the system to follow small changes in strain during controlled laboratory measurements.
The actual measurement performance of a complete test system also depends on the connected sensor, its calibration, installation quality, signal conditioning and the test configuration.
Therefore, the data acquisition unit should always be used together with compatible and properly calibrated measurement sensors.
Digital Test Data Monitoring
The Static Unilogger works as an interface between the physical measurement sensor and the digital software environment.
During a test, incoming electrical signals are continuously converted into digital values. These values can then be displayed and evaluated through the connected test software.
This structure makes it easier to monitor several channels within the same experiment and reduces the need to read individual measuring instruments separately.
Digital data acquisition can also support more organised evaluation of measurement results after the test.
Laboratory Test System Integration
The LT-G0580 can be integrated into laboratory systems that use compatible strain-gauge-based sensors.
Its 4-channel configuration, 24 Bit A/D conversion and 1 microstrain resolution make the unit suitable for precision measurement applications where several sensor inputs must be managed through one electronic system.
The product page does not provide external dimensions, weight, power supply or sampling frequency values. For this reason, these parameters should be confirmed before the unit is included in a project-specific technical specification.
Overall, the Static Unilogger Data Acquisition Unit provides a compact digital interface for monitoring sensor signals in laboratory testing systems. Its multi-channel architecture and high-resolution signal conversion support controlled and organised measurement-data acquisition.
