Plastic Beakers

What Is a Plastic Beaker?

A Plastic Beaker is a practical laboratory vessel used for preparing, mixing, transferring and temporarily holding liquids. Liya Test offers a wide model range covering both standard beakers and larger Plastic Beakers with Handle.

The standard models are available from 25 mL to 2000 mL, while handled models extend from 250 mL to 5000 mL. This wide capacity range allows laboratories to select a suitable vessel according to sample volume and working conditions.

Standard Plastic Beaker Models

The standard product group includes 25, 50, 100, 250, 500, 1000 and 2000 mL capacities.

Smaller models such as 25, 50 and 100 mL can be useful for low-volume sample preparation. Medium-capacity 250 and 500 mL models provide additional working space for routine laboratory applications.

For higher liquid quantities, 1000 and 2000 mL models offer increased capacity.

Plastic Beakers with Handle

For larger-volume handling, Liya Test offers Plastic Beakers with Handle.

Available capacities include 250, 500, 1000, 2000, 3000 and 5000 mL.

The handle helps the user hold and transfer the vessel more comfortably, particularly when working with higher liquid volumes.

This design can be practical during manual pouring, solution preparation and general laboratory liquid transfer.

Laboratory Applications

Plastic Beakers can support a wide variety of daily laboratory procedures, including:

• liquid preparation
• manual mixing
• sample preparation
• temporary liquid holding
• transfer between containers
• rinsing procedures
• general laboratory handling

The correct capacity should be selected according to the required working volume.

Approximate Volume Use

Beakers are generally intended for preparation and handling rather than high-precision volumetric measurement.

If a beaker includes graduation marks, these should normally be treated as approximate volume indicators unless a specific accuracy classification is confirmed.

For precise volume preparation, suitable volumetric glassware or calibrated measuring equipment should be used.

Plastic Material and Chemical Compatibility

The available product information identifies the products as plastic but does not specify the exact polymer type.

Therefore, materials such as PP, PMP, PE or HDPE should not be added without technical confirmation.

Chemical resistance can vary significantly depending on the plastic material. Users should verify compatibility before working with acids, solvents or other aggressive chemicals.

Choosing the Correct Model

The most suitable Plastic Beaker depends on the required liquid volume and handling method.

Standard models are practical for routine laboratory work, while handled models provide additional convenience for higher-volume applications.

Overall, the Plastic Beaker product group provides a broad selection from 25 mL to 5000 mL, supporting both small-scale laboratory preparation and larger-volume liquid handling applications.