Muffle Furnaces
STANDART: TS EN 196-2; ASTM C25, C115, EN 12697-1 Clause C, EN 13108
LT-G0275 Muffle Furnace | 1100 C°, 4 Liter
LT-G0276 Muffle Furnace | 1100 C°, 7 Liter
LT-G0277 Muffle Furnace | 1100 C°, 10 Liter
LT-G0278 Muffle Furnace | 1100 C°, 20 Liter
LT-G0283 Muffle Furnace| 1100 C°, 45 Liter
LT-G0279 Muffle Furnace | 1200 C°, 4 Liter
LT-G0280 Muffle Furnace | 1200 C°, 7 Liter
LT-G0281 Muffle Furnace| 1200 C°, 10 Liter
LT-G0282 Muffle Furnace | 1200 C°, 20 Liter
LT-G0283 Muffle Furnace | 1200 C°, 45 Liter
Muffle Furnaces are designed for controlled high-temperature treatment of cement, aggregate, mineral, metal, ceramic and similar laboratory samples. The series offers maximum operating temperatures of 1100 °C or 1200 °C and chamber capacities from 4 to 45 litres. A programmable PID microprocessor controller maintains stable temperature conditions, while the insulated chamber construction helps reduce heat loss and supports uniform heat distribution.
- 1100 °C and 1200 °C Models: Allows the laboratory to select the required maximum operating temperature.
- 4–45 L Chamber Capacities: Available in 4, 7, 10, 20 and 45 litre versions.
- PID Temperature Control: Microprocessor controller continuously regulates chamber temperature.
- ±2 °C Temperature Sensitivity: Supports controlled laboratory heating processes.
- Programmable Operation: Multiple temperature and holding programs can be stored.
- Backlit LCD Display: Shows operating and temperature information.
- Delayed Start: Allows the heating cycle to begin at a preset time.
- Power Failure Protection: Supports safer recovery after interruptions.
- Insulated Chamber: Fibre insulation and heat-resistant firebricks reduce heat loss.
- Fume Outlet: Helps remove fumes produced during high-temperature processes.
- Durable Outer Housing: Electrostatic powder-coated steel construction.
- Power Supply: 220 V, 50–60 Hz, 1 Ph across the listed models.
| Product Code | Product Name | Capacity (L) | Max. Temperature | Temperature Sensitivity | Power Supply |
| LT-G0275 | Muffle Furnace | 4 | 1100 °C | ±2 °C | 220 V, 50–60 Hz, 1 Ph |
| LT-G0276 | Muffle Furnace | 7 | 1100 °C | ±2 °C | 220 V, 50–60 Hz, 1 Ph |
| LT-G0277 | Muffle Furnace | 10 | 1100 °C | ±2 °C | 220 V, 50–60 Hz, 1 Ph |
| LT-G0278 | Muffle Furnace | 20 | 1100 °C | ±2 °C | 220 V, 50–60 Hz, 1 Ph |
| LT-G0283 | Muffle Furnace | 45 | 1100 °C | ±2 °C | 220 V, 50–60 Hz, 1 Ph |
| LT-G0279 | Muffle Furnace | 4 | 1200 °C | ±2 °C | 220 V, 50–60 Hz, 1 Ph |
| LT-G0280 | Muffle Furnace | 7 | 1200 °C | ±2 °C | 220 V, 50–60 Hz, 1 Ph |
| LT-G0281 | Muffle Furnace | 10 | 1200 °C | ±2 °C | 220 V, 50–60 Hz, 1 Ph |
| LT-G0282 | Muffle Furnace | 20 | 1200 °C | ±2 °C | 220 V, 50–60 Hz, 1 Ph |
| LT-G0284 | Muffle Furnace | 45 | 1200 °C | ±2 °C | 220 V, 50–60 Hz, 1 Ph |
LT_KTS_KULFIRINI
Muffle Furnaces for High-Temperature Laboratory Testing
Muffle Furnaces provide controlled high-temperature heating for cement, mineral, aggregate, metal, ceramic and similar laboratory samples. The product series combines different chamber capacities with maximum temperatures of 1100 °C and 1200 °C, allowing laboratories to select a suitable furnace according to sample quantity and test requirements.
1100 °C and 1200 °C Temperature Options
Two maximum-temperature ranges are available. The 1100 °C series is suitable for routine laboratory heating, ashing and thermal treatment applications.
For processes requiring higher temperatures, the 1200 °C series provides additional operating range.
Both product groups are available with 4, 7, 10, 20 and 45 litre chamber capacities. This broad selection supports both routine testing and higher sample volumes.
PID Temperature Control
The integrated microprocessor-based PID controller continuously monitors the furnace temperature and regulates heater output.
The control panel displays actual operating temperature and allows programmed heating sequences to be prepared. Liya also lists timed programs, delayed-start functions, warnings and power-interruption protection among the furnace control features.
This programmable structure helps laboratories repeat frequently used heating procedures under similar conditions.
Insulated High-Temperature Chamber
The furnace chamber combines heat-resistant firebrick with fibre-based insulation. The insulation helps reduce heat loss and supports more uniform heat distribution inside the chamber.
A dedicated fume outlet is also provided to assist with the removal of gases or fumes generated during heating processes.
Laboratory Applications
Muffle furnaces can support ashing, loss-on-ignition testing, thermal ageing, heat treatment, chemical decomposition and high-temperature sample preparation.
For cement laboratories, EN 196-2:2025 specifies current chemical-analysis methods for cement.
ASTM C114-24 also covers chemical analysis of hydraulic cement and includes muffle furnaces among the required laboratory apparatus.
For limestone and lime testing, ASTM C25-24 covers chemical analysis of limestone, quicklime and hydrated lime.
Flexible Capacity for Different Laboratories
Small-volume laboratories can select the 4 or 7 litre models. Medium-volume applications can use the 10 or 20 litre versions, while the 45 litre furnaces provide increased chamber space for higher sample throughput.
As a result, Muffle Furnaces combine programmable temperature control, multiple chamber capacities and high-temperature insulation for reliable laboratory heating and ashing applications.
