The Rotating Sample Divider (RSD) is designed to split bulk mineral, ore and other free-flowing samples into accurate and representative proportions. The system allows the operator to select a split ratio between 10% and 50%, producing two separate fractions: the required sample and the remaining material.
- Representative sample division: Produces accurate subsamples from a larger bulk sample.
- Adjustable split ratio: Allows representative division from 10% to 50%.
- Two separate fractions: Produces one test sample and one remainder fraction.
- 25 kg capacity: Suitable for medium-to-high-volume laboratory sample preparation.
- Compact bench-top design: Can be installed on a laboratory work bench.
- Ring mill compatibility: Liya states that the bench-top unit can be used together with a bench-top ring mill.
- Sealed bearings: Support reliable and low-maintenance operation.
- Robust construction: Designed for regular mining and mineral laboratory use.
- Easy operation: Simple working principle reduces manual sample splitting.
- External dimensions: Approximately 60 × 56 × 50 cm.
- Weight: Approximately 85 kg.
- Power supply: 220 V, 50 Hz, 1 Ph.
| Product Code | Product Name | Capacity (kg) | Split Ratio | External Dimensions (cm) | Weight (kg) | Power Supply |
| LT-M0660 | Rotating Sample Divider | 25 | 10–50% | 60 × 56 × 50 | 85 | 220 V, 50 Hz, 1 Ph |
What Is a Rotating Sample Divider?
The Rotating Sample Divider is designed to reduce a bulk sample into smaller and representative laboratory fractions. It is especially useful in mining, mineral processing and sample-preparation laboratories where the analytical sample must preserve the characteristics of the original material.
The LT-M0660 uses a rotating dividing mechanism to separate material into controlled proportions. Liya Test states that the system can produce an accurate representative split at any selected proportion between 10% and 50%.
This allows laboratories to prepare smaller test samples without relying entirely on manual splitting.
Adjustable 10–50% Sample Split
One of the main advantages of the LT-M0660 is its adjustable proportional dividing capability.
The operator can select a representative fraction between 10% and 50% of the original sample. The system then separates the material into two outputs: the required laboratory sample and the remaining material.
This configuration makes the unit useful where different sample quantities are required for separate laboratory procedures.
Two Representative Fractions
The Rotating Sample Divider produces two separate fractions during operation.
One fraction becomes the analytical or test sample. The second fraction contains the remaining bulk material. This arrangement simplifies repeated sample reduction because the operator can retain either fraction depending on the laboratory requirement.
By using a controlled mechanical dividing process, the system also helps reduce variability caused by manually taking material from only one area of the bulk sample.
25 kg Sample Capacity
Liya Test lists the LT-M0660 with a 25 kg capacity. This capacity supports laboratory preparation of relatively large mineral and ore samples before further crushing, grinding or analytical testing.
The machine can therefore be positioned between bulk sample handling and fine laboratory preparation stages.
Compact Bench-Top Construction
The current English product page describes the system as a bench-top rotating sample divider. Its external dimensions are approximately 60 × 56 × 50 cm, allowing installation on an appropriate laboratory bench.
Liya Test also states that the bench-top RSD can operate in combination with a Bench Top Ring Mill, supporting an integrated sample-preparation workflow.
Sealed Bearings and Robust Design
The LT-M0660 uses sealed bearings within its rotating mechanism. This construction helps protect moving components from dust generated during mineral sample preparation.
Its robust body and simple operating system are intended for regular laboratory use. Routine cleaning between different samples remains important to reduce cross-contamination.
Technical Construction
The LT-M0660 Rotating Sample Divider has a rated capacity of 25 kg.
Its external dimensions are approximately 60 × 56 × 50 cm, while the complete unit weighs approximately 85 kg. The machine operates with 220 V, 50 Hz, single-phase electrical power.
Overall, the Rotating Sample Divider combines adjustable proportional splitting, compact dimensions and a 25 kg working capacity. Therefore, mining and mineral laboratories can prepare representative subsamples more efficiently before further analysis.
