Description
PC software for crushing test data acquisition together with each test load curves data and statistic analysis. Device can be controlled by the Software and results can be print out with any printer connected to the PC.
Software to control and save the test data.
Calibration system based on an external certified 10kN load cell complete of signal conditioning unit.
System Features
The loading device, with a capacity of 10 KN (~1,000 kg), works at constant compression speed (5, 10, 15 or 20 mm/ min). The low speed is kept only during the compression period. High speed movement of the compression plate is provided in the approach and return phases to reduce total test time.
Data are displayed and printed kilogram with a resolution of 1 kg.
Automatic feeder
A continuous feeder, consisting in a vibrating pot in which the pellets can be put in bulk, is included in the LT-M0100 assembly.
Operating Mode
The equipment can be operated in MANUAL or AUTO Mode.
In MANUAL mode the operator moves down the press and determines the load at which the test piece undergoes complete breakage.
In AUTO Mode the electronic unit identifies automatically the crushing strength as the maximum load in a “LOAD DECREASE CRUSHING LOGIC” or a “TIME BASE CRUSHING LOGIC” with programmable parameters.
AUTO Mode allows using the system not only for routine purpose but also as a research tool.
LT-M0100 Data Manager
The LT-M0100 Data Manager is an optional dedicated Software that allows the operator to have an on-line monitoring of test results and to get the print out of Test report as in the Standards.
Acquisition, archiving, printing and export of test data, together with graphical representation of the results are fully provided.
The software is compatible with Microsoft Windows© environment.
