Description
Modern laboratory furnace pulls underlying the formation but used for performing precise test can be used to remove potentially dangerous aesol. Harmful gases and vapors formed in the laboratory environment is based on the proper operation of the fume hood with suction and conditions of the work area.
Hood that acid mist generated during operation, the heater, with a discharge system which can remove gas such as process flavors are devices connected to the system assigns to the external environment by hazardous weather systems in the workplace.
Electro epoxy electrostatic paint on galvanized sheet,
a window made of tempered glass that can be opened vertically,
Cabins, steam acid may occur during the work on the machine, and the heat absorbing structure and capacity to remove contaminants such as process immediately aroma,
Is the air intake of the engine. 1250 m 3 / hour capacity,
Cabin lighting is provided by fluorescent lamps. Truck affected by the quarry into the mechanism established to create a chemical vapor should be buried so that no surge in cabin space.
During the study it does not create noise pollution,
Possible protected against flooding water,
Camping windscreen frame guillotine type,
optionally water tap in the cabin,
According to the air suction flow physics,
ENGINE
Air suction motor acid and acid vapor resistant PP (Polypropylene) are made of material. 2650 rpm motor power used, 1300m³ / h, 0.8 is 180w’t. Motor speed can be gradually opened and the speed control unit on / off switch is located on the front panel of the device.
SPECIAL REQUESTS
Custom sizes and in different production characteristics
Panels for use in controlled aspiration gas cabinet may be placed according to user’s request combustible gas and water fittings.
Aspiration PP sink into the cabin.
Automatic windscreen can be switched on and off.
Material that can be used with the instrument cabinet
