Description

Liya Test Mono Shaft Mixer Concrete mixer provides homogeneous mixture thanks to the shaft located in the fixed mixing bowl. Thanks to the lid on it, the mixture can be controlled safely and additives and water can be added. After the mixture is finished, the mixing bowl is rotated with the button on the device control unit and the mixture is poured.

LT-C0094 Mono Shaft Concrete Mixer with Unloading Motor

This machine is suitable for building scientific research units and construction companies and the concrete component unit test chamber,
mixing of ordinary concrete, lightweight concrete and dry concrete, can also be applied to other industries Laboratory for mixing different materials.
The machine is easy to operate, high mixing efficiency, small residual, easy to clean, it is an ideal test room with concrete mixing equipment.
Main Technical Parameters
1. feed capacity: 48 liters, discharge capacity: 30 liters (30 type) 96 liters, discharging capacity: 60 liters (60 type)
2. Maximum discharge capacity: 33 liters (30 type) 66 litres (60 type)
3. Mixer speed: 48 RPM / min.
4. The mixing time of less than 45 seconds.
5. Net weight: about 200 kg

Working Principle
The machine is composed of a frame, a stirring device, a transmission system, a spacing device and an electric control system.
The frame is a supporting part of the equipment, welded together by the channel, the mixing device comprises a mixing barrel, stirring shaft, stirring shovel composition, mixing shovel sheet is fixed on the mixing arm, and the stirring shaft is integrally formed two groups of spiral in the opposite direction, but the pitch and helix angle of the same spiral stirring shovel the stirring shovel and the mixing barrel, arm clearance micro adjustment.
The transmission mechanism is composed of a speed reducer and a coupling, wherein, the cylinder limiting device is composed of a locking pin and a positioning hole, and the electric control system has the functions of starting, inching, stopping and timing.
Working principle: deceleration motor through the coupling of the stirring shaft rotation in one direction, and stirring shaft of the two groups of shovel mixing material, the helix angle, shovel working barrel material from one side to the other side, and the other side pushed back by circular movement, so that the materials are fully mixing, stirring to obtain the ideal effect.
When unloading, stop the machine, open the lock pin, make the cylinder rotate a certain angle, and then limit the point, press the button to move the mixture out of the cylinder.